ProSecure Unified Threat Management (UTM) Appliance

available wireless access point, and has a Wireless Statistics option arrow in the upper right of the screen.)

Figure 282.

The UTM9S and UTM25S also show a table with available access points at the bottom of the Network Status screen:

Figure 283.

The following table explains the fields of the Network Status screen:

Table 124. Network Status screen fields

Item

Description

LAN (VLAN) Information

For each of the LAN ports, the screen shows the IP address and subnet mask. For more detailed information, see Table 127 on page 495.

WAN Information

For each of the WAN ports, the screen shows the IP address, subnet mask, and status of the port (UP or DOWN). For the UTM9s and UTM25S, the screen also shows this information for the xDSL (SLOT-1 or SLOT-2) and USB ports. For more detailed information, see Table 127 on page 495.

Available Access Points Table

Note: This information is displayed for the UTM9S and UTM25S only.

Monitor System Access and Performance

489

Page 489
Image 489
NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Network Status screen fields, 489, LAN Vlan Information, WAN Information