NETGEAR UTM5EW-100NAS, STM150EW-100NAS Default Settings, UTM default configuration settings, 666

H. Default Settings and Technical Specifications H

This appendix provides the default settings and the physical and technical specifications of the UTM in the following sections:

•Default Settings

•Physical and Technical Specifications

Default Settings

You can use the Factory Defaults reset button on the rear panel to reset all settings to their factory defaults. This is called a hard reset (for more information, see Revert to Factory Default Settings on page 447):

•To perform a hard reset, press and hold the Factory Defaults reset button for approximately 8 seconds (until the Test LED blinks rapidly). The UTM returns to the factory configuration settings that are shown in the following table.

•Pressing the Factory Defaults reset button for a shorter period simply causes the UTM to reboot.

The following table shows the default configuration settings for the UTM:

Table 193. UTM default configuration settings

Feature

Login settings

Default behavior

User login URL	https://192.168.1.1
Administrator user name (case-sensitive)	admin
Administrator login password (case-sensitive)	password
Guest user name (case-sensitive)	guest
Guest login password (case-sensitive)	password

666