NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Configure the SSL Settings for Https Scanning, 237

ProSecure Unified Threat Management (UTM) Appliance

Configure the SSL Settings for HTTPS Scanning

To configure the SSL settings for HTTPS scanning:

1.Select Application Security > SSL Settings > SSL Settings. The SSL Settings screen displays.

Figure 131.

2.Enter the settings as explained in the following table:

Table 52. SSL Settings screen settings

Setting

Description

SSL 3rd Party Website Certificate Handling

Select the Allow the device to present the website to the client check box to allow a Secure Sockets Layer (SSL) connection with a valid certificate that is not signed by a trusted certification authority (CA). The default setting is to block such a connection.

SSL Settings

Select the Allow the device to handle SSL connections using SSLv2 check box to allow HTTPS connections using SSLv2, SSLv3, or TLSv1. If this check box is cleared, the UTM allows HTTPS connections using SSLv3 or TLSv1, but not using SSLv2.

3.Click Apply to save your settings.

Content Filtering and Optimizing Scans

237