Compaq SW3323 Switch Configuration Menu, Snmp Configuration Menu Descriptions, 8User Interface

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3-8User Interface

Table 3-4 describes the SNMP Configuration Menu.

	Table 3-4
	SNMP Configuration Menu Descriptions
Selection	Description
SNMP Private	The community name for read/write SNMP access to the device (1-10 character
Community Name	range; the default name is: “private”).
SNMP Public	The community name for read only SNMP access to the device (1-10 character
Community Name	range; the default name is: “public”).
Trap Destination #1	The IP address of trap destination #1 where SNMP trap messages are forwarded.
Trap Destination #2	The IP address of trap destination #2 where SNMP trap messages are forwarded.
Trap Destination #3	The IP address of trap destination #3 where SNMP trap messages are forwarded.
Trap Destination #4	The IP address of trap destination #4 where SNMP trap messages are forwarded.

Switch Configuration Menu

The Switch Configuration Menu allows you to modify switching-related configuration parameters. Select b from the Main Menu to view the Switch Configuration Menu. Figure 3-6 shows the Switch Configuration Menu.

SWITCH CONFIGURATION Access Control: READ/WRITE

a. Forwarding Table Configuration Menu
b. Spanning Tree Configuration Menu
c. VLAN Configuration Menu
d. Forwarding Table Aging Time(seconds)	300
e. Broadcast Cutoff Rate	500000
f. Port Mirroring Enable	No
g. Mirrored Port	2
h. Mirroring Port	1
i. Transmit Data Mirroring Enable	Yes
j. Receive Data Mirror Enable	No
k. Class of Service Configuration Menu
x. Previous Menu
Enter Selection:

Figure 3-6SNMP Configuration Menu