Compaq SW3322, SW3324, SW3323 Configuring Port Operation, 10Configuring and Monitoring the Switch

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4-10Configuring and Monitoring the Switch

To configure Class of Service, do the following:

1.Select Class of Service Configuration Menu from the Switch Configuration Menu.

2.Press a to turn the global switch Class of Service operation on or off by toggling the Class of Service Enable option.

3.Select Priority Threshold and type a number between 0 and 7.

4.Select Configure Port Priority.

The Port Priority Menu displays. From this menu, individual port priority levels can be configured.

Configuring Port Operation

You can configure RJ-45 ports for operational parameters such as auto- negotiation, duplex mode, port speed, and flow control. 1000Mb/s port speed and duplex mode are 1000Mb/s and full duplex respectively, and are thus not configurable.

To configure port operation, do the following:

1.Select Port Menu from the Main Menu.

2.Select Configure and enter a port number. Press <Enter>.

The port number entered displays on the top of the Port Configuration screen.

3.Select Port Name and enter a Port Name. Press <Enter>.

4.Select Port Enable to toggle between enabling (Yes) and disabling (No) the port.

5.Select Flow Control Enable to toggle between enabling (Yes) or disabling (No) flow control on the port.

6.Select Auto-negotiation Enable to toggle between enabling (Yes) or disabling (No) auto-negotiation on the port.