Bay Technical Associates DS2-RPC, DS4-RPC, DS73, DS2-RPC DS4-RPC Change Password, DS-RPC Config

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

DS-RPC > CONFIG

1) . . . Change Password

2) . . . Change Outlet Name

3) . . . Enable/Disable Confirmation

4) . . . Enable/Disable Status Menu

X) . . . Exit

Enter Request:

Change Password	Select #1, “Change Password,” and press
	<cr> The DS-RPC responds:
	Enter Current Password:
	If this is not an initial set-up and a password
	has already been set, enter the current
	password, followed by <cr>, otherwise,
	press <cr>. If you enter the password
	incorrectly, the DS-RPC responds with an
	“Error” message and returns to the main
	menu. Consequently, you must start over by
	typing “CONFIG” to access the
	configuration menu. If you enter the current
	password correctly, the DS-RPC responds:
	Enter New Password:
	Enter a new password (maximum field
	length, 8 alphanumeric characters), followed
	by <cr>. The DS-RPC responds:
	Re-Enter New Password:
	Re-enter the new password identically to the
	first entry. The password feature is case
	sensitive. If you fail to re-enter the new
	password correctly, the DS-RPC responds
	with an “Error” message and returns to the
	main menu. Consequently, must start over
	by typing CONFIG” from the RPC > prompt
	to access the configuration menu. If you re-

65