Bay Technical Associates DS2-RPC DS4-RPC, DS73 115.2K None Off High Exit/Save..….......1

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

Type "B" for 115.2K baud rate. The DS71 responds with the new configuration status:

Module 1 Serial Port Configuration :

Port	Device	Baud	Word	Stop	Parity	Xon/	Xoff/	Line	Drive
	Name	Rate	Size	Bits		Xmit	Recv	DTR	RTS
1	EIA-232	115.2K	8	1	None	Off	Off	High	High
Exit/Save..….......1		Set Parity...….........5
Set Baud Rate….2		Set Xon/Xoff….......6
Set Word Size….3		RTS Line Driver....7
Set Stop Bits..…..4		DTR Line Driver...8
Enter Request :

Set Word Size by selecting #3, “Set Word Size.” The DS71 displays the following list of available word sizes:

1	For 5
2	For 6
3	For	7
4	For	8

Enter the corresponding number for the desired word size. The DS71 responds with the new configuration status:

Module 1 Serial Port Configuration :

Port	Device	Baud	Word	Stop	Parity	Xon/	Xoff/	Line	Drive
	Name	Rate	Size	Bits		Xmit	Recv	DTR	RTS
1	EIA-232	115.2K	8	1	None	Off	Off	High	High
Exit/Save..….......1		Set Parity...….........5
Set Baud Rate….2		Set Xon/Xoff….......6
Set Word Size….3		RTS Line Driver....7
Set Stop Bits..…..4		DTR Line Driver...8
Enter Request :

To permanently save configuration changes, select 1, “Exit/Save,” from the selection menu, followed by <cr>. The DS71 responds:

Change Host Device to Match NEW Configuration

Before Answering this Request

Save Changes Permanently ? (Y/N) :

30