DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

If you have made necessary changes to the host device, type "Y" for yes, followed by <cr>. New configuration changes are stored permanently in non-volatile memory.

The unit returns with the following message:

Enter Host Device Number (1-2) :

If you have completed your Serial Port configuration then <cr>.

PORT DEVICE NAME Port Device Name is a user programmable feature that uniquely identifies the port (or device connected to the port) you are configuring. The DS71 has one host device and the DS71-MD2 has two host devices.

The default name for the host device in

Port 1 is EIA-232. The default name for

Port 2 (MD2 only) is Host MODEM.

Select #3, “Port Device Name,” followed by <cr>. The DS71-MD2 module responds:

Enter Host Device Number (1-2)

Select the number of the host device whose Port Device Name you want to program. The DS71-MD2 responds with a menu similar to the following. The DS71 goes directly to this menu:

Module 1 Device Name :

Port

Device

Baud

Word

 

Stop

Parity

Xon/

Xoff/

Line

Drive

 

Name

Rate

Size

 

Bits

 

Xmit

Recv

DTR

RTS

1

HOST

9600

8

 

1

None

Off

Off

High

High

 

EIA-232

 

 

 

 

 

 

 

 

 

 

 

 

 

Enter Port Device Name (Max. 16 characters):

 

 

 

 

or press ENTER for no change ...........:

 

34

Page 42
Image 42
Bay Technical Associates DS73, DS2-RPC, DS4-RPC, DS2-RPC DS4-RPC owner manual DTR RTS Host