Bay Technical Associates DS73, DS2-RPC, DS4-RPC, DS2-RPC DS4-RPC Properties, DIAL-UP Networking

DS-RPC OWNER’S MANUAL APPENDIX C

__________________________________________________________________________________________

APPENDIX C

PROPERTIES

ØHighlight the device you have just created.

ØSelect “File” from the Windows task bar.

ØSelect “Properties.”

ØSelect “General.”

ØSelect “Configure.” Ensure the information is correct.

ØSelect “Options.” Enable “Bring up Terminal Window after Dialing.”

ØClick “OK.”

ØSelect “Server Type”.

ØIn the “Server Type” Menu, select “PPP: Windows 95, Windows NT, 3.5, Internet.”

ØIn the “Advanced Options;” Enable software compression.

ØIn the “Allowed Network Protocols;” Enable TCP/IP.

ØClick “TCP/IP Settings.” Enable the following settings. You must enable Header Compression.

∙Server Assigned IP Address

∙Server Assigned Name Server Address

∙Use IP Header Compression

∙User default gateway on remote network

ØClick “OK” three times.

ØYou should be in the Dial-Up Networking screen.

ØSelect the device you are adding. The icon for the device you are dialing appears on the Dial-Up Networking screen.

DIAL-UP NETWORKING

ØIn the Dial-Up Networking Window, double click the device you are dialing.

ØClick “Connect To.”

ØUser Name. Enter the user name programmed in the DS73TP.

Default User Name is user1.

ØEnter the password programmed in the DS73TP.

ØDefault password is BTA.

79