Bay Technical Associates DS2-RPC, DS4-RPC, DS73, DS2-RPC DS4-RPC DS-RPC Module Configuration

DS-RPC OWNER’S MANUAL QUICK START

__________________________________________________________________________________________

Accessing RPC Menu Select the RPC module. The following status menu appears:

DS-RPC Series

(C)1997 by BayTech Rev. F0.04

Circuit Breaker : On

1) . . . OUTLET 1	: Off
2) . . . OUTLET 2	: Off
3) . . . OUTLET 3	: Off
4) . . . OUTLET 4	: Off
RPC >

If the status menu fails to appear, ensure the correct cables and adapters are being used and that they are connected properly. Also, verify the serial communication parameters are correctly configured.

Controlling Receptacles To set or change the status of the receptacles, enter one of the following commands: ON n, OFF n, REBOOT n, where “n” is the outlet number you want to command. Entering an outlet number of “0” sends the command to all outlets. Reboot only works on outlets which are in the “ON” condition.

DS-RPC MODULE CONFIGURATION

Accessing Configuration From the DS-RPC Main Menu, select

MenuC, “Configuration,” followed by <cr>. The following selection menu appears:

Configuration
Module 1	1
Module 2	2
Module 3 ……………………………….3
Select Port	S
Exit	X
Enter Request :

8