Bay Technical Associates DS2-RPC, DS4-RPC, DS2-RPC DS4-RPC owner manual DS73TP

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

DS73TP	The DS73TP peripheral communications
CONFIGURATION	module supports remote access to TCP/IP
	Ethernet networks by using the DS71 or
	DS71-MD2 module, the DS73TP module
	and the DS-RPC. Remote users can dial into
	the system and connect to the network host
	from anywhere, at anytime. In-band network
	management is achieved using the DS73TP
	module via the DS71 or DS71-MD2 module
	and a PPP Dial-Up session

IMPORTANT: For network access, you must configure the Module and Dial-up IP addresses, Subnet Mask, and Gateway Address. The module must be reset for network changes to take effect.

From the main menu, select C, “Configuration,” followed by <cr>, or exit from the main menu and send the ASCII character string $BTCONFIG<cr>.

The following selection menu appears:

Configuration
Module 1	1
Module 2	2
Module 3	3
Select Port	S
Exit	X
Enter Request :

From the selection menu, select the DS73TP module number, followed by <cr>. For example, If the DS73TP is installed as module 2, select #2, “Module 2.” The following header appears:

53