Bay Technical Associates DS2-RPC, DS4-RPC, DS73, DS2-RPC DS4-RPC owner manual Configuration

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

CONFIGURATION

DS71 OR DS71-MD2If you are using the Menu Selection Method,

CONFIGURATION select C, “Configure,” followed by <cr> from the DS-RPC Main Menu. The following selection menu appears:

Configuration
Module 1	1
Module 2	2
Module 3	3
Select Port	S
Exit	X
Enter Request :

If you are using the ASCII Character String Method, exit main menu, then select the module to configure. To select Module #1, type $BT1<cr>. The DS71 or DS71-MD2 responds “Requested Connection Made.” Send the ASCII configuration command $CONFIG. The configuration menu appears.

Enter the number of the module to configure, followed by <cr>. To configure the host module 1, select #1. The following configuration menu appears for the DS71:

Copyright(C) Bay Technical Associates 1998

DS71 Data Switch Series - Host Module

Revision F.2.01

Module 1

Status.....................…………..….......1

Serial Port Configuration...……......2

Port Device Name..............………....3

Port Select Code..............…………..4

Attention Character.........……….....5

Disconnect Timeguard.....……….....6

Connect Port ID Echo....……….......7

Login Setup....................……………8

DCD Logon/Logoff.......……….........9

Unit ID........................……………...U

Configure Another Module.....….....C

Exit...........................………………...X

26