Bay Technical Associates DS2-RPC DS4-RPC, DS73 owner manual Login Setup, Header is enabled

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

If you are enabling Port ID Echo, choose #2 to echo the module and port number, followed by <cr>. Choose #3 to echo the device name, followed by <cr>. The DS71 or DS71-MD2 module stores the selected Connect Port ID Echo in non-volatile memory and returns to the configuration menu.

NOTE: If you choose #3, “Use Device Name,” the programmed Port Device Name for the selected DS74 is used.

LOGIN SETUP	This configures how the host modem
	responds upon login. You can
	Enable/Disable the Header and Menu and/or
	Enable/Disable/Program Password and Auto
	Connect Port.
	From the configuration menu, select #8,
	“Login Setup,” followed by <cr>. The
	following menu appears:
	Header....…....................... 1
	Password..…..................... 2
	Menu...........…................... 3
	Auto Connect…................ 4
	Exit...................…............. X, CR
Header	If enabled, the following header appears with
	the main menu upon initiation of power or
	after a modem connection to the host module
	has been established. If disabled, the header
	does not appear with the main menu. Default
	Header is enabled.
	Data Switch Series – F.2.01
	Bay Technical Associates
	Unit ID: DS71-MD2
	Port Select Code: $BT
	Attention Character: ;

39