DETAILED OPERATION AND CONFIGURATION
__________________________________________________________________________________________
The status of the following features appears:
Installed Modules: 1, 2, 3, …(etc) |
|
Port Select Code is | $BT |
Attention Character is | ; |
Disconnect Time Guard is | Disabled |
Port ID Echo is | Disabled |
Unit ID is | |
DCD Logon/Logoff is ……………..Disabled (DS71 only) | |
NOTE: The entries in parentheses are added to help clarify what you may see in the menu. These parentheses do not appear on your screen.
Local Modem Setup: (* | |
Rings to | 2 (*) |
Modem to Modem Xon/Xoff FlowControl..Disabled (*) | |
Modem Connectivity is .........…. 60 minutes (*) | |
Escape Character is ..............…. 43 + (*) | |
Login Setup: |
|
Header is | Enabled |
Password is | Disabled |
Menu is | Enabled |
Auto Connect Port is | Module 2, Port 1 |
Auto Connect is | Disabled |
Strike Any Key to Continue
Port | Device | Baud | Word | Stop | Parity | Xon/ | Xoff/ | Line | Drive |
| Name | Rate | Size | Bits |
| Xmit | Recv | DTR | RTS |
1 | Host | 9600 | 8 | 1 | None | Off | Off | High | High |
2 | Host Modem | 57.6k | 8 | 1 | None | Off | Off | High | High |
Strike any Key to Continue
Note: On the DS71 module only Port 1 will be displayed since there is no Host Modem installed.
SERIAL PORT | |
CONFIGURATION | for devices using different serial |
| configurations. See Appendix A, |
| “SPECIFICATIONS” for available serial |
| parameters. Default Serial Port |
| Configurations are 9600 bps, 8 data bits, |
| 1 stop bit, no parity, Xon/Xoff disabled, |
| RTS high, and DTR low. |
28
