Bay Technical Associates DS2-RPC, DS4-RPC, DS73, DS2-RPC DS4-RPC Post Dial Terminal Screen

DS-RPC OWNER’S MANUAL APPENDIX C

__________________________________________________________________________________________

APPENDIX C

ØClick the “Save Password” box in the “Connect” screen.

ØEnter the telephone number of the unit you are dialing.

ØEnter the location you are dialing from, usually Default Location.

ØClick “Dial Properties.” Select the dialing properties from your current location.

ØClick “OK.”

ØClick “Connect.”

POST DIAL TERMINAL SCREEN

NOTE: You may want to set up the DS73TP module to auto- connect at dial-up. If not auto connected, you must select the port from the DS71 or DS71-MD2 module main menu. If you are auto- connected, and decide not to enter the module, type the attention character five times to return to the DS71 or DS71-MD2 module main menu.

ØAfter a successful connection is established, select the DS73TP module. The following menu appears:

ØDS73TP Ethernet Module F.0.02

ØCopyright (C) 1997

ØBay Technical Associates

ØPress F7. Windows 95 Dialer enters the user name and password.

Ø	Enter User Name:	user1
Ø	Enter Password:	BTA

ØLogin successful.

ØUse your web browser, FTP, TELNET, or any TCP/IP application to

communicate on the network.

80