__________________________________________________________________________________________
APPENDIX E
ASCII CHARACTER DEFINITION
ASCII CHARACTER | DEFINITION |
|
|
$BT | Releases the module to receive the attention |
| character |
|
|
$BTm | Calls up a module (where m is a module number) |
|
|
$BTm,p | Calls up a module and port (where m is a module |
| number and p is a port number) |
|
|
$BTB | Locks the module in the binary mode. A “Break” |
| signal must be sent to clear this lock |
|
|
$CONFIG | Accesses the module configuration menu |
|
|
$BTRESET | Resets the unit. All communication will be lost if |
| attached via the modem |
|
|
85
