iHome iDM8N1 instruction manual Troubleshooting, Unit doesn’t respond no power, Resetting the Unit

Troubleshooting

Unit doesn’t respond (no power)

•Make sure unit is completely charged. Check that all connections are

correct and properly plugged in. Make sure your device is properly paired with the iDM8N1.

•Make sure the Off/Bluetooth/Aux Switch is not in the Off (left) position.

Resetting the Unit

If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it. To do so, move the Off/Bluetooth/Aux Switch to the Bluetooth position (center), then press and hold the Pairing Button for about 8-10 seconds until a long beep sounds. Doing so will restore the unit to default settings. NOTE: After a reset, you will need to re-pair your Bluetooth device(s).

Trouble pairing device/computer with iDM8N1

Bluetooth implementation varies depending on your computer’s hardware and operating system. Please see our website for updates on pairing.

•Make sure you have the latest firmware for your iPad, iPhone or iPod (update via iTunes if needed).

•Make sure your device is working properly. Check your device’s manual for details on Bluetooth pairing and linking.

For further information and to see the latest instructions, visit www.ihomeaudio.com/support

10