iHome instruction manual Using Bluetooth Pairing Your Device Using the iDM8N1

Using Bluetooth: Pairing Your Device Using the iDM8N1

NOTE: See the iDM8N1 Bluetooth Connection Guide for complete pairing details.

1.Move the Off/Bluetooth/Aux Switch to the Bluetooth position (center). The green and amber lights flash on front of the unit and it beeps twice to indicate auto-pairing attempt.

2.Turn on Bluetooth capability on your device and make it discoverable (see your device’s instructions to add or setup a Bluetooth device).

3.Press and hold the Pairing Button for 2 seconds. A tone will sound and green and amber lights will flash while the unit attempts to pair. “iHome iDM8N1” should appear on your

device’s menu. If “Not Paired”, “Not Connected” or similar appears, tap on “iHome iDM8N1” to begin pairing. If your device asks for a password, enter 1234 on the keyboard of your device. If no device is paired within 3 minutes, the unit will power off. If this occurs, retry steps 1-3.

4.Once paired with a device, a tone will sound and the green light will glow steadily. There should be an indication on

your device that pairing is complete. On some devices, you must then select “Use as Audio Device (stereo)” or similar on the device’s Bluetooth menu. Once paired, your device should link to the iDM8N1 whenever within range.

4