Bay Technical Associates DS2-RPC DS4-RPC DS-RPC Quick Start, EIA-232 Serial Connection, Operation

DS-RPC OWNER’S MANUAL QUICK START

__________________________________________________________________________________________

DS-RPC QUICK START

This section, “Quick Start,” describes the basic steps required to set up and configure your DS-RPC. If you need to acquaint yourself further with setup, configuration, and operations, see “Detailed Operations and Configuration” beginning on page 18.

EIA-232 SERIAL CONNECTION

Using the 9FRJ45PC-4 adapter and the RJ08X007 (8 pin crossed) cable, connect the serial port of your computer to the RJ-45 port labeled “EIA-232” on the DS71 or DS71-MD2 module.

Load serial port communications software. Set serial communications parameters to 9600 bps, 8 data bits, 1 stop bit, and no parity.

OPERATION

Accessing Main Menu Power on the DS-RPC. The following header and main menu appears if using the DS71:

Data Switch Series - F.2.01

Bay Technical Associates

Unit ID: DS71

Port Select Code: $BT

Attention Character: ;

Device A	(2,1)	1
Device B	(2,2)	2
Device C	(2,3)	3
Device D	(2,4)	4
DS-RPC	(3,1)……...…5
Configure		C
I/O Modules Reset		RM
Unit Reset		RU
Exit.........................…...............X
Logout		T
Enter Request:

NOTE: The DS71 and DS71-MD2 have some menus that are different. Where this situation occurs it will be addressed.

6