DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

 

Use the menu driven selection or the ASCII

 

character string method to reset the DS-

 

Series Unit:

Menu

From the main menu, type “RU” to select

Driven

“Reset Unit,” followed by <cr>. The DS71

Selection

series module resets the unit and responds:

 

Reset Unit……

 

Allow approximately 10 seconds for the unit

 

to reset.

ASCII

To reset the DS-Series Unit using the ASCII

Character

character string method, send the following

String

command: $BTRESET<cr>

NOTE: If you are locally connected through the serial port when the unit is reset, the DS71 or DS71-MD2 module sends the header message and returns to the Main Menu. A modem connection to the DS71-MD2 terminates when the unit resets.

50

Page 58
Image 58
Bay Technical Associates DS2-RPC, DS4-RPC, DS73, DS2-RPC DS4-RPC owner manual Driven, Ascii