Bay Technical Associates DS2-RPC, DS4-RPC, DS73, DS2-RPC DS4-RPC Port Select, Code is $BT

DS-RPC OWNER’S MANUAL

DETAILED OPERATION AND CONFIGURATION

__________________________________________________________________________________________

Enter a new port device name up to 16 characters. For example, if you are using multiple DS-RPC units on a network, and you want to name the host device Southeast Region, type "SE REGION" followed by <cr>. The module responds:

Module 1 Device Name :

Port	Device	Baud	Word		Stop	Parity	Xon/	Xoff/	Line	Drive
	Name	Rate	Size		Bits		Xmit	Recv	DTR	RTS
1	SE	9600	8		1	None	Off	Off	High	High
	REGION
				Enter Port Device Name (Max. 16 characters):
				or ENTER for no change ...........:

	If you are satisfied with the new device name,
	press <cr>. The DS71-MD2 responds again:
	Enter Host Device Number (1-2)
	If there are no further changes, press <cr> to
	return to the configuration menu. The DS71
	goes directly to the configuration menu.
PORT SELECT	The Port Select Code is an ASCII character
CODE	string sent by the host terminal to the DS71 or
	DS71-MD2 module to select an I/O port on a
	DS74 peripheral module. The Port Select
	Code can range from 1 to 8 characters and is
	user programmable. Default Port Select
	Code is $BT.

From the configuration menu, select #4, “Port Select Code,” followed by <cr>. The host module displays the current port select code and asks if you want to change:

Port Select Code is	$BT
Change It ? (Y/N) :

35