Compaq SW3323, SW3324, SW3322 manual XLIVRIX1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

￿￿￿7214￿1EREKIQIRX

The groups specifically defined in RFC 1213 and supported by the switch system software are as follows:

■System – General information about the agent system

■Interfaces – Information about the network interfaces of the system

■Address Translation – Interface address information, both MAC level and network (IP) level

■IP – Statistics and information related to the IP protocol

■ICMP – Statistics and information related to the ICMP protocol

■TCP – Statistics and information related to the TCP protocol

■UDP – Statistics and information related to the UDP protocol

■Transmission – Statistics and information related to the physical network medium to which the system interfaces (e.g. Ethernet, token ring, etc.).

■SNMP – Statistics and information related to the SNMP protocol

6*'￿￿￿￿￿￿￿)XLIVRIX￿1-&￿

RFC 1398 provides management and monitoring for the Ethernet-specific aspects of each port on the switch. This is the Ethernet-specific statistics subgroup of the MIB-II Transmission group. This group provides a set of statistics related to Ethernet’s physical level operation. Specifically, error and collision-related statistics are presented.

6*'￿￿￿￿￿￿￿&VMHKI￿1-&￿

RFC 1493 is a group defined under MIB-II. This MIB deals with the operation of the system as an 802.1D-compliant bridge. Areas of functionality supported by this group include Spanning Tree and forwarding table information and configuration.