Cleaning and Care
Cleaning the ice cube tray
The ice cubes are formed in a tray before they are dropped into the drawer.
The tray should be cleaned regularly to remove any stale ice or water.
^Connect the appliance to the electrical supply.
^Press the On/Off button for the ice cube maker, the indicator light will turn on.
^Empty the ice cube drawer.
^Press the On/Off button for the ice cube maker for approx. 10 seconds (after approx. 1 second the ice maker will turn off and the indicator light will go out).
The indicator light will flash.
^Push the ice cube drawer in as far as it will go within the next 60 seconds.
The ice cube tray will then rotate into an angled position for easier cleaning.
Wait until the ice cube tray has completed this rotation before continuing.
^Remove the ice cube drawer.
^Clean the ice cube drawer and tray with a mild solution of warm water and liquid dish soap.
^Press the On/Off button on the ice cube maker.
The ice cube tray rotates back into its original position.
^Replace the ice cube drawer and close.
The ice cube maker will begin producing ice cubes again after a maximum of 6 hours.
If the ice cube maker has not been used for an extended period of time, it is important to clean the ice cube tray before using it again.
Ventilation slits
^Check the ventilation slits regularly. Remove any dirt/dust with a vacuum cleaner or brush. Clean as needed.
28
