Before use
Before using for the first time
The stainless steel frames of the shelves have a protective plastic coating to prevent scratching during transportation.
^Do not remove the plastic until the appliance has been installed.
^After removing the plastic, treat the stainless steel with a stainless steel cleaner.
This will help protect the stainless steel and prevent resoiling.
^Clean the inside of the appliance and the accessories with a mild solution of warm water and liquid dish soap.
To ensure proper functioning of the appliance, let it stand for approx. 30 mins to an hour before it is connected to the electrical supply.
Turning the appliance on
With the main switch you can turn the appliance on.
^Press the main switch on the right side of the control panel.
The temperature display for the refrigerator section lights up, and the interior lighting comes on when the door is opened.
Bars light up in the freezer section display until the selected temperature is reached.
The appliance begins cooling.
Allow the appliance to run for a few hours before placing food in it. This will enable it to sufficiently cool.
Cool pack
Place the cool pack in the top freezer drawer. The cool pack will be at maximum performance after it has been in the freezer for approx. 24 hours.
Turning the appliance off
^Press the main switch on the right side of the appliance until both temperature displays go out.
If the cooling system does not turn off the safety lock has been activated.
10
