Installing the appliance
^With a pencil, lightly mark a line down the center of the inside of the custom door.
^Hang the fixing bracket d with the mounting aids on the inside of the custom door. Align the bracket centrally.
^Secure the fixing bracket with at least 6 screws e (4 x 14 mm). (For framed doors, use only 4 screws at the edge).
^Carefully pull the mounting aids up and out f.
^Turn them around, and fit them into the middle slots of the fixing bracket g for safe keeping.
^Hang the custom door on the adjusting bolts h.
^Loosely attached the nuts c onto the adjusting bolts.
^Close the door. Check the distance between the custom door and adjacent cabinetry doors.
^Align the custom door with the adjacent cabinetry doors:
Side adjustments X are achieved by sliding the cabinetry door.
Height adjustments Y are achieved by turning the adjustment bolts h with a flathead screwdriver.
^Tighten the nuts c.
54
