Frequently asked questions
"nA" appears in the temperature display for the freezer section.
Possible fault | Solution | |
|
| |
The temperature in the freezer | ^ Press the alarm off button while "nA" is | |
section has risen too high at some | lit in the display. | |
point during the last few days | The display will show the warmest | |
because of a power failure. | ||
temperature reached in the freezer | ||
| ||
| during the power failure for about 1 | |
| minute. The display will then revert to the | |
| current temperature in the freezer | |
| section. After the power failure the | |
| appliance will continue running at the | |
| last temperature set, there is no need to | |
| ||
|
| |
The ice cube maker will not turn on. |
| |
Possible fault | Solution | |
|
| |
The appliance is not plugged in. | Check that the appliance is connected | |
| to the power supply. | |
|
|
The ice cube maker is not producing any ice cubes.
Possible fault
Solution
When the appliance is turned on for the very first time, it can take up to 24 hours for the first ice cubes to drop out of the ice cube maker and collect in the container.
The water supply line was not primed | Contact Miele Technical Service. |
(purged of air) before the appliance |
|
was used for the first time. |
|
|
|
The appliance is not turned on. | Check that the appliance is switched on, |
| using the main switch on the right side. |
|
|
The ice cube maker is not turned on. | See "Ice cube maker - Turning on". |
|
|
The water supply is not open. | See "Plumbing". |
|
|
The indicator light on the ice cube maker is flashing.
A fault has occurred. Contact Miele Technical Service.
33
