Adjusting the door hinges
Removing the door closing device
^With its exterior facing downwards, place the appliance door on a stable surface.
^Leave the hinges open and remove the screw from the mounting a.
Caution! When uninstalled, the door closing device will snap shut.
^Loosen the ball joint b using an open ended wrench.
^Remove the door closing device c together with the ball joint b.
Do not remove the door closing device from the ball joint!
This will cause damage.
^Stand the appliance doors up individually, and loosen the hinges on the front (hinges remain open).
^Pull out the plugs a from the top, middle and bottom (if the plugs are not in the doors, the are supplied separately in the packaging).
^Remove the screws from all the hinges b.
^Relocate each hinge diagonally in the opposite corner.
Do not close the hinges.
Risk of injury!
^To tighten the hinges, use a power screwdriver – the screws b are
^Use the plugs a to close the holes on the opposite side.
47
