Adjusting the interior fittings
Moving the shelves
The shelves can be adjusted according to the height of the food:
^Lift the shelf, pull it forwards slightly, until the notch at the side is in line with the shelf support. It can now be moved up or down as desired.
The raised edge at the back of the shelf must face upwards to prevent food from touching the back of the appliance.
Stops prevent the shelves from unintentionally being pulled out too far.
Split shelf
To accommodate tall items such as tall bottles or containers, one of the shelves is divided. The front section can be gently pushed under the rear section:
^Pull the front half of the glass shelf forwards slightly, then slide it carefully under the rear half.
To move the split shelf:
^Remove both halves of the glass.
^Fit the brackets onto the support on the left and right sides at the desired height.
^Slide in the glass shelves one after the other.
The glass shelf with the raised edge should be placed at the back.
Fruit and vegetable drawers on rollers
(depending on model)
The fruit and vegetable drawers are mounted on rollers and can be pulled out for loading, unloading and cleaning. The rollers can also be removed for cleaning.
25
