Installing the appliance
The following installation instructions are for a
Installing the appliance as a room divider
If you wish to install the appliance as a room divider, the back of the installation niche must be fitted with a panel, so the back of the appliance is not exposed.
Tools needed:
–a Philips head screwdriver,
–various sizes of Torx screwdrivers,
–an
Custom door panels
The total weight of the panel(s) must not exceed the following, otherwise the hinges may be damaged:
KFN 9755 iDE
Upper door . . . . . . . . . . . 31 lbs (14 kg) Lower door . . . . . . . . . . . 27 lbs (12 kg)
Aligning the installation niche
Before installing the appliance, the cabinetry must be carefully aligned using a level. The cabinetry corners must be at 90° angles, otherwise the custom door panels will not be flush with all 4 corners of the cabinetry.
49