Getting started

04

 

ENTER

7

Select the TV screen type,

‘Wide (16:9)’ or ‘Standard (4:3)’.

k SettingTVScreen Size

Line System

r Save Wide (16:9)

Standard (4:3)

pNavigator

 

ENTER

8

Select whether or not your TV

is compatible with progressive scan video.

kSettingProgressive t Line System

er Save

Compatible

P Not Compatible

p Navigator Don't Know

 

ENTER

9

Set the HDMI output (only

when an HDMI component is connected).

kSettingHDMI Setting

LineSetSystemto the transmission mode optimized for

the connected device? er Save

* Under this setting, nothing may appear

P on the screen due to HDMI cables, etc. The mode returns to the current setting

p Navigator

after 30 seconds.

Yes

No

Depending on the HDMI component you have connected, the above screen may not appear.

Select Yes if you want this unit to automatically set the optimum setting for the device connected to the HDMI terminal.

There are cases where nothing appears on the screen after the automatic setup due to an HDMI cable, etc. If you do not perform any operations in this case, this unit returns to the previous setting in 30 seconds.

Select No if you want to make this setting later.

10 ENTER Press to continue after reading the HDD caution.

k SettingInthe event of HDD failure, recordings may

be lost or normal playback/recording may t Line System

not be possible.

er Save

As recordings might be lost in case of a HDD P failure, we recommend to use the HDD only

as temporary storage media. p Navigator

Please copy recordings you want to keep to recordable DVD.

Press ENTER to continue.

 

ENTER

11

Select ‘Finish Setup’ to exit

the Setup Navigator, or ‘Go Back’ if you want to start again.

k Setting

tLine Systemetupis complete! er Save

Finish Setup

p Navigator

Go Back

That completes basic setup using the Setup Navigator.

If there are blank channels with no station, you can set these to skip using the manual channel setting. See Manual CH Setting on page 109.

31

En

Page 31
Image 31
Pioneer DVR-LX70 manual ‘Wide 169’ or ‘Standard 43’, Is compatible with progressive scan video, Set the Hdmi output only