Pioneer DVR-LX70 manual 128

15Additional information

ProblemRemedy

HDMI Control does • Verify that the HDMI cable is firmly connected (page 21).

not respond• Check whether HDMI Control is set to On for this unit and the device connected to this unit. For more information, refer to the operating instructions of your plasma television or AV system.

•Depending on the type of plasma television, some HDMI input terminals do not support the HDMI Control function. For details, see the operating instructions supplied with your plasma television.

•HDMI Control may not operate properly if you do not use an HDMI cable that supports the HDMI 1.3 Specification.

•This function may not work properly if you have multiple recorders connected to a single plasma television or AV system. For more information, refer to the operating instructions of your plasma television or AV system.

•Controls may not function properly in certain situations, such as immediately after you have connect an HDMI cable, turn this unit’s power off or remove the power cable for this unit or the connected component. If you experience any problems, set HDMI Control to On for all connected units, and then display the pictures stored on this unit on your plasma television to improve the situations.

•Check whether the connected component supports HDMI Control or not.

•Certain functions are not supported on with plasma televisions and AV systems.

•We cannot guarantee this unit will work with HDMI Control- compatible components other than those made by Pioneer. When using HDMI Control-compatible components manufactured by companies other than Pioneer, set the HDMI Control to Off (page 117).

If the unit does not operate normally due to external effects such as static electricity, disconnect the power plug from the outlet and insert again to return to normal operating conditions.

If the picture freezes and the front panel and remote control buttons stop working

•Press  (Stop) then try restarting playback.

•Press the front panel  STANDBY/ON button to switch the power off, then switch back on and restart playback. If the power fails to switch off, press and hold  STANDBY/ON for five seconds until the power switches off.

STANDBY/ON

			HDD/DVD
		DivX	COPY
STANDBY/ON	DV IN	USB

OPEN/CLOSE

STOP REC

INPUT

CHSELECT

128

En