Connections
02
18
En
Connecting to a cable box or satellite receiver (1)
If you are using a cable box or satellite
rece iv er wi th on ly a few scrambled channels,
follow the setup on this page1. If many or all
the channels are scrambled, we recommend
using the setup on the following page.
Using the setup on this page you can:
• Record unscrambled channels by
selecting them on this recorder.
• Record scrambled c hannels by selecting
them on the cable box/satellite receiver
and using the Auto Start Recording
feature (see Automatic recording from a
satellite tuner on page 47).
• Watch one channel while recording
another.
Important
• Do not connect this recorder ‘through’
your VCR, satellite receiver or cable box.
Always connect each component
directly to your TV or AV amplifier/
receiver.
1 Connect RF antenna cables as shown.
This enables you to watch and record TV
channels.
2 Connect the AUDIO and VIDEO
OUTPUT jacks (1 or 2) on this recorder to
a set of audio/video inputs on your TV
using a set of A/V cables (as supplied).
This enables you to watch the output from
this recorder.
3 Connect the audio/video output of
your cable box/satellite receiver to the
INPUT1 jacks on this recorder using a set
of A/V cables.
This enables you to record scrambled TV
channels.
Note
1 The diagram shows standard video connections, but you can alternatively use the S-Video or component video
connections if they’re available.
AC IN
DIGITAL
AUDIO OUT
COAXIAL
HDMI OUT
CONTROL
IN
S-VIDEO
VIDEOAUDIO L
R
ANTENNA
IN
OUT
INPUT 1
/
AUTO START REC
INPUT 3 S-VIDEO
VIDEO
AUDIO L
R
Y
P
B
P
R
COMPONENT VIDEO OUT
OUTPUT 1
OUTPUT 2
TV
Antenna/cable TV
wall outlet
Cable box/
Satellite receiver
ANTENNA
OUT
1
1
OUTPUT 1
INPUT 1/AUTO
START REC
12
3
To antenna
input
To antenna
input
From antenna
output
To audio/
video input
From audio/
video output
ANTENNA
IN (RF IN)
DVRLX70_TF_EN.book 18 ページ 2007年8月1日 水曜日 午後4時14分