Pioneer DVR-LX70 manual Out

Connections

Connecting to a cable box or satellite receiver (2)

If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.1

Using the setup on this page you can:

•Record any channel by selecting it on the cable box/satellite receiver.

•Record using the Auto Start Recording feature (see Automatic recording from a satellite tuner on page 47).

Important

•Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amplifier/ receiver.

02

1Antenna/cable TV wall outlet

To antenna							From audio/
							video output
input
From antenna				Cable box/
output
				Satellite receiver
ANTENNA						3
				INPUT 1/AUTO
IN (RF IN)
				START REC
ANTENNA					COMPONENT VIDEO OUT
IN				PR	PB	Y	DIGITAL
		INPUT 3		S-VIDEO		OUTPUT 2	AUDIO OUT
R	AUDIO	L	VIDEO			S-VIDEO	AC IN
						CONTROL	HDMI OUT COAXIAL
						IN
OUT
	INPUT 1/AUTO START REC			R	AUDIO	L VIDEO OUTPUT 1
ANTENNA						OUTPUT 1
OUT

	2
1
To antenna	To audio/
	video input
input
	TV

1Connect RF antenna cables as shown. This enables you to watch and record TV channels.

2Connect the AUDIO and VIDEO OUTPUT jacks (1 or 2) on this recorder to a set of audio/video inputs on your TV using a set of A/V cables (as supplied). This enables you to watch discs.

3Connect the audio/video output of your cable box/satellite receiver to the INPUT 1 jacks on this recorder using a set of A/V cables.

This enables you to record scrambled TV channels.

Note

1• The setup on this page does not allow you to watch one channel and record another.

•The diagram shows standard video connections, but you can alternatively use the S-Video or component video connections if they’re available.

19

En