Pioneer DVR-LX70 Using the built-in TV tuner, Recording equipment and copyright, CH +/- buttons

Recording

CPRM

CPRM is a copy protection/scrambling system developed for the recording of ‘copy once’ broadcast programmes. CPRM stands for Content Protection for Recordable Media.

This recorder is CPRM compatible, which means that you can record copy-once broadcast programmes, but you cannot then make a copy of those recordings. CPRM recordings can only be made on CPRM- compatible DVD-R (ver. 2.0/8x or higher) or DVD-RW (ver. 1.1 or higher) discs formatted in VR mode, DVD-RAM discs or on the HDD.

DVD CPRM recordings can only be played on players that are specifically compatible with CPRM.

Recording equipment and copyright

Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the country in which you are making a copy. Copying of copyright material such as films or music is unlawful unless permitted by a legal exception or consented to by the rightowners.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Using the built-in TV tuner

There are three different ways to select TV channels. Note that you can’t change the TV channel during playback, recording or during recording standby.

CH

•CH +/– buttons

	ABC	DEF
GHI	JKL	MNO
PQRS	TUV	WXYZ
•		CLEAR Number buttons
		CLEAR

For example, to select channel 4, press 4 then ENTER; for channel 34, press 3, 4,

ENTER.1

• CH +/– buttons on the front panel

Changing audio channels

Taiwan and Philippines model:

Some TV programmes are broadcast with both a main and a Secondary Audio Programme (SAP). You can change the TV audio using the AUDIO button.

•AUDIO Press to change the audio type. The current audio channel is displayed on- screen.

Mono SAP

Stereo

•If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.

•If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.

05

Note

1• Taiwan and Philippines model: Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.

• Other: Channel presets are numbered 1 through 99.

35

En