Pioneer DVR-LX70 manual Editing a timer programme, Deleting a timer programme

05Recording

Editing a timer programme

You can change any of the settings in a timer programme before the recording is due to start.

1Press TIMER REC.

2Highlight the timer programme you want to change.

3Press  then select ‘Modify’ from the command menu panel.

Alternatively, press ENTER.

The Timer Programme Set screen appears from which you can edit the settings.

4Edit the timer recording settings as necessary.

5Select ‘Store Programme’ to finish. Confirm the settings you made from the following screen.

Deleting a timer programme

You can delete timer programmes you no longer need.

1Press TIMER REC.

2Highlight the timer programme you want to erase.

3Press  then select ‘Erase’ from the command menu panel.

•Select Yes to confirm or No to cancel.

•You can also just press CLEAR when the timer programme is highlighted.

Skipping a regular timer programme

If you’ve set a regular daily or weekly timer programme, you can set the recorder to skip the next scheduled recording.

1Press TIMER REC.

2Highlight the timer programme you want to skip.

44

3Press  then select ‘Cancel Once’ from the command menu panel.

•In the timer programme list, Cancel Once appears by the programme.

•You can also just press  PAUSE when the timer programme is highlighted.

Extending a timer recording in progress

You can extend a timer recording beyond the programmed end time in two different ways. This can be useful if a broadcast programme overruns, for example.

Cancelling or extending the timer

REC

1 Press and hold for three seconds during a timer recording.

Recording continues, but the timer indicator disappears from the front panel display indicating that the timer has been cancelled.

REC

2 Press repeatedly to extend recording in 30 minute blocks.

Programming a new end time

You can edit the end time of a timer recording you have previously set.

1Press TIMER REC.

2 Highlight the timer recording you want to change.

	ENTER
3	Press  then select ‘Modify’

from the command menu panel. Alternatively, press ENTER.

The Timer Programme Set screen appears, from which you can edit the settings.

	ENTER
4	Edit the end time as necessary.

You can also edit the Extend time parameter.

En