Pioneer DVR-LX70 Code programming with the power off, Checking/editing timer recording settings

Recording 05

3Confirm that the settings are correct.

If the channel number isn’t displayed, use the / buttons to highlight CH, then use the / buttons to set the correct channel number.

•If the channel number is set, but incorrectly, set up the guide channel (see G-Code CH Setting on page 109).

4Select ‘Store Programme’ to finish.

•Other options in the same menu panel allow you to name the programme, and change the recording destination and/or recording mode.

Checking/editing timer recording settings

You can check and/or edit the timer recording settings made by the G-Code system by selecting Details from the G-Code# setting screen.

	ENTER
1	Select ‘Details’ from the

G-Code# setting screen.

The Timer Programme Set screen appears, filled out with the timer recording details.

2Check and edit the fields as necessary.

See Setting a manual timer recording on page 42 for more on this.

	ENTER
3	Select ‘Store Programme’ to

save the timer programme and exit.

G-Code programming with the power off

You can enter a G-Code programming number when the recorder is in standby.

Note that the recording is always made to the HDD. If you want to record to a DVD disc, you’ll need to switch on the power and use the full G-Code programme screen.

Important

•You can’t use this feature until you have set up the guide channels, see G-Code CH Setting on page 109.

•You can’t change the recording mode.

•You can’t program daily or weekly timer recordings.

1 Press ‘G-Code’.

The front panel display shows the current recording mode and prompts you to enter the G-Code programming number.

2Use the number buttons to enter the number.

•To clear the last digit entered, press

CLEAR.

3Press ENTER.

The display shows the timer settings:

Date  Start time  End time  HDD and Recording channel  Recording mode

•If CODE ERROR appears in the display, check that the number is correct and that the guide channel is set (see G-Code CH Setting on page 109), then set the timer recording again.

•If CAN’T SET appears in the display, it means that although you entered a valid number, the programme has already finished.

41

En