Pioneer DVR-LX70 manual Connections Using other types of video output, Video input Input

Connections

Using other types of video output

This recorder has standard (composite), S-Video and component video outputs. The main difference between them is the quality of the picture. S-Video delivers a better picture than composite video, while component video gives better picture quality still. The variety of outputs also gives you the flexibility of connecting your particular equipment using the best connection type available.

To component	To S-Video
video input	input
2	TV
COMPONENT	1
VIDEO OUT

ANTENNA						COMPONENT VIDEO OUT
IN					PR	PB	Y	OUTPUT 2		DIGITAL
		INPUT 3		S-VIDEO						AUDIO OUT
R	AUDIO	L	VIDEO					S-VIDEO		AC IN
								CONTROL	HDMI OUT	COAXIAL
								IN
OUT
	INPUT 1/AUTO START REC				R	AUDIO	L VIDEO	1

S-VIDEO

OUTPUT

02

1Connecting using an S-Video output S-Video carries the picture as separate colour and luminance (brightness) signals.

There are two S-Video outputs for connection to TVs, monitors, VCRs or other equipment.

•Use an S-Video cable (not supplied) to connect an S-VIDEO OUTPUT (1 or 2) to an S-Video input on your TV, monitor (or other equipment).

2Connecting using the component video output.

Component video carries the picture as two separate colour signals, plus a luminance (brightness) signal.

See also Component Video Out on page 110 for how to set up the component video output for use with a progressive scan- compatible TV.

•Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT jacks to a component video input on your TV, monitor (or other equipment).

17

En