Pioneer DVR-LX70 manual Usb

14The Initial Setup menu

Setting	Options	Explanation
Options
On Screen Display	On •	The recorder displays operation displays (Stop, Play,
		etc.) on-screen.
	Off	Switches off the on-screen operation displays.
Front Panel Display	On •	The time is shown in the front panel display when the
		recorder is in standby.
	Off	The front panel display is switched off in standby.
Remote Control	Recorder 1–3	If you are using more than one recorder in the same
Mode	(default: Recorder 1)	room, set them to different IDs. This setting sets the
		recorder ID; to change the remote controller ID,
		press and hold RETURN then press 1, 2 or 3 to set.
		The remote will only control a recorder with the same
		ID.
DivX VOD	Registration Code	Use to display the recorder’s DivX registration code.
		See DivX video compatibility and DivX® VOD content
		on page 10.
Set Preview	Quick Preview •	When in the Disc Navigator, the thumbnail video
(HDD only)		plays short excerpts from throughout the selected
		title. (Note that edited titles that will play normally
		from the beginning.)
	Normal	The thumbnail video plays from the beginning of the
		title.
Options 2
USB	Restart USB	If the connected USB device does not respond to the
	Device	recorder, try using this option to restart it. If the
		device still does not work properly try switching it off
		then back on, and/or disconnecting then
		reconnecting the USB cable.
	Confirm Printer	Use this option to confirm the make and model of the
		printer connected to the recorder (does not work with
		all printers).

HDD Sleep Mode Proceed

118

Puts the HDD to sleep. Using this feature when playing DVDs or CDs allows you to reduce noise produced by the unit, resulting in improved sound quality. When you wake the HDD back up it will take a few seconds to load.

The HDD can be taken out of Sleep Mode by any number of actions, including:

•Turning the power off and on again.

•Pressing the HDD/DVD button and choosing the HDD.

•When a timer recording begins.

•When you try and make any changes to system settings.

En