NETGEAR UTM5EW-100NAS Configure the Client IP Address Range, SSL VPN Client screen settings, 366

ProSecure Unified Threat Management (UTM) Appliance

Configure the Client IP Address Range

First determine the address range to be assigned to VPN tunnel clients, and then define the address range.

To define the client IP address range:

1. Select VPN > SSL VPN > SSL VPN Client. The SSL VPN Client screen displays:

Figure 219.

2.Select the check box and complete the fields as explained in the following table:

Table 95. SSL VPN Client screen settings

Setting	Description
Client IP Address Range
Enable Full Tunnel Support	Select this check box to enable full-tunnel support. If you leave this check
	box cleared (which is the default setting), full-tunnel support is disabled but
	split-tunnel support is enabled, and you need to add client routes (see Add
	Routes for VPN Tunnel Clients on page 367).
	Note: When full-tunnel support is enabled, client routes are not operable.
DNS Suffix	A DNS suffix to be appended to incomplete DNS search strings. This setting
	is optional.

Virtual Private Networking Using SSL Connections

366