NETGEAR STM150EW-100NAS Configure Routing Information Protocol,  To delete one or more routes

ProSecure Unified Threat Management (UTM) Appliance

To edit a static route that is in the Static Routes table:

1.On the Routing screen (see Figure 63 on page 121), click the Edit button in the Action column for the route that you want to modify. The Edit Static Route screen displays. This screen is identical to the Add Static Route screen (see the previous screen).

2.Modify the settings as explained in the previous table.

3.Click Apply to save your settings.

To delete one or more routes:

1.On the Routing screen (see Figure 63 on page 121), select the check box to the left of each route that you want to delete, or click the Select All table button to select all routes.

2.Click the Delete table button.

Configure Routing Information Protocol

Routing Information Protocol (RIP), RFC 2453, is an Interior Gateway Protocol (IGP) that is commonly used in internal networks (LANs). RIP enables a router to exchange its routing information automatically with other routers, to adjust its routing tables dynamically, and to adapt to changes in the network. RIP is disabled by default.

To enable and configure RIP:

1.Select Network Config > Routing.

2.Click the RIP Configuration option arrow to the right of the Routing submenu tab. The RIP Configuration screen displays:

LAN Configuration

123