NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Add Mode Config Record screen settings, 314

ProSecure Unified Threat Management (UTM) Appliance

Figure 185.

3.Complete the fields, select the check box, and make your selections from the drop-down lists as explained in the following table:

Table 77. Add Mode Config Record screen settings

Setting	Description
Client Pool
Record Name	A descriptive name of the Mode Config record for identification and management
	purposes.
First Pool	Assign at least one range of IP pool addresses in the First Pool fields to enable the
	UTM to allocate these to remote VPN clients. The Second Pool and Third Pool
Second Pool
	fields are optional. To specify any client pool, enter the starting IP address for the
Third Pool	pool in the Starting IP field, and enter the ending IP address for the pool in the
	Ending IP field.
	Note: No IP pool should be within the range of the local network IP addresses. Use
	a different range of private IP addresses such as 172.173.xxx.xx.
WINS Server	If there is a WINS server on the local network, enter its IP address in the Primary
	field. You can enter the IP address of a second WINS server in the Secondary field.

Virtual Private Networking Using IPSec, PPTP, or L2TP Connections

314