NETGEAR UTM5EW-100NAS, STM150EW-100NAS VPN client authentication settings, 282, 10.34.116.22, Ike

ProSecure Unified Threat Management (UTM) Appliance

Note: This is the name for the authentication phase that is used only for the VPN client, not during IKE negotiation. You can view and change this name in the tree list pane. This name needs to be a unique name.

The Authentication pane displays in the Configuration Panel screen, with the Authentication tab selected by default.

Figure 167.

4.Specify the settings that are explained in the following table.

Table 67. VPN client authentication settings

Setting	Description
Interface	Select Any from the drop-down list.
Remote Gateway	Enter the remote IP address or DNS name of the UTM. For example, enter
	10.34.116.22.
Preshared Key	Select the Preshared Key radio button. Enter the pre-shared key that you already
	specified on the UTM. For example, enter I7!KL39dFG_8. Confirm the key in the
	Confirm field.
IKE	Encryption	Select the 3DES encryption algorithm from the drop-down list.
	Authentication	Select the SHA1 authentication algorithm from the drop-down list.
	Key Group	Select the DH2 (1024) key group from the drop-down list.
		Note: On the UTM, this key group is referred to as Diffie-Hellman
		Group 2 (1024 bit).

Virtual Private Networking Using IPSec, PPTP, or L2TP Connections

282