NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual 119, Setting Description

ProSecure Unified Threat Management (UTM) Appliance

Table 23. DMZ Setup screen settings (continued)

Setting	Description
DHCP
Disable DHCP Server	If another device on your network is the DHCP server for the VLAN, or if you will
	configure the network settings of all of your computers manually, select the Disable
	DHCP Server radio button to disable the DHCP server. By default, this radio button
	is not selected, and the DHCP server is enabled.
Enable DHCP Server	Select the Enable DHCP Server radio button to enable the UTM to function as a
	Dynamic Host Configuration Protocol (DHCP) server, providing TCP/IP
	configuration for all computers connected to the VLAN. Enter the following settings:
	Domain Name	This setting is optional. Enter the domain name of the UTM.
	Starting IP	Enter the starting IP address. This address specifies the first of
	Address	the contiguous addresses in the IP address pool. Any new
		DHCP client joining the LAN is assigned an IP address
		between this address and the ending IP address. The IP
		address 192.168.1.2 is the default start address.
	Ending IP Address	Enter the ending IP address. This address specifies the last of
		the contiguous addresses in the IP address pool. Any new
		DHCP client joining the LAN is assigned an IP address
		between the starting IP address and this IP address. The IP
		address 192.168.1.100 is the default ending address.
		Note: The starting and ending DHCP IP addresses should be
		in the same network as the LAN TCP/IP address of the UTM
		(that is, the IP address in the DMZ Port Setup section as
		described earlier in this table).
	Primary DNS	This setting is optional. If an IP address is specified, the UTM
	Server	provides this address as the primary DNS server IP address. If
		no address is specified, the UTM provides its own LAN IP
		address as the primary DNS server IP address.
	Secondary DNS	This setting is optional. If an IP address is specified, the UTM
	Server	provides this address as the secondary DNS server IP
		address.
	WINS Server	This setting is optional. Enter a WINS server IP address to
		specify the Windows NetBIOS server, if one is present in your
		network.
	Lease Time	Enter a lease time. This specifies the duration for which IP
		addresses are leased to clients.
DHCP Relay	To use the UTM as a DHCP relay agent for a DHCP server somewhere else in your
	network, select the DHCP Relay radio button. Enter the following setting:
	Relay Gateway	The IP address of the DHCP server for which the UTM serves
		as a relay.

LAN Configuration

119