NETGEAR UTM5EW-100NAS manual Connect to a ReadyNAS and Configure Quarantine Settings, 458

ProSecure Unified Threat Management (UTM) Appliance

Table 111. System Date & Time screen settings (continued)

Setting	Description
NTP Server (default or	Server 1 Name / IP Address	Enter the IP address or host name of the primary
custom)		NTP server.
(continued)
	Server 2 Name / IP Address	Enter the IP address or host name of the backup
		NTP server.

3.Click Apply to save your settings.

Note: If you select the default NTP servers or if you enter a custom server FQDN, the UTM determines the IP address of the NTP server by performing a DNS lookup. Before the UTM can perform this lookup, you need to configure a DNS server address on the WAN ISP Settings screen of the single WAN port models or on one of the WAN ISP Settings screens of the multiple WAN port models (see Manually Configure the Internet Connection on page 75.)

Connect to a ReadyNAS and Configure Quarantine Settings

•Log Storage

•Connect to a ReadyNAS

•Configure the Quarantine Settings

The UTM can quarantine questionable emails (including spam), attachments, objects, and web files. This requires an increasing amount of storage space, which is not available on the UTM. To accommodate these storage requirements, you need to connect the UTM to a NETGEAR ReadyNAS and configure the quarantine settings. Without integration with a ReadyNAS, you cannot use the quarantine options of the UTM.

You can select to quarantine emails, attachments, objects, and web files on one or more of the following screens:

•Email Anti-Virus screen (see Customize Email Antivirus and Notification Settings on page 196)

•Distributed Spam Analysis screen (see Configure Distributed Spam Analysis on page 207)

•Malware Scan screen (see Configure Web Malware or Antivirus Scans on page 216)

•FTP screen (Configure FTP Scanning on page 238)

Network and System Management

458