NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual Log Storage, Connect to a ReadyNAS, 459

ProSecure Unified Threat Management (UTM) Appliance

Log Storage

After you have integrated a ReadyNAS with the UTM—whether or not you have configured the quarantine settings—all logs that are normally stored on the UTM are now stored on the ReadyNAS. That is, all logs that you can specify on the Email and Syslog screen (see Configure and Activate System, Email, and Syslog Logs on page 467) and that you can query on the Log Query screen and view onscreen (see Query and Manage the Quarantine Logs on page 514) are stored on the ReadyNAS. However, after you have integrated a ReadyNAS with the UTM, logs can no longer be sent to an email address (see the Email Logs to Administrator section on the Email and Syslog screen). If you have enabled a syslog server on the Email and Syslog screen, logs are still sent to the syslog server.

WARNING:

When you integrate a ReadyNAS with the UTM, the logs that were saved on the UTM are deleted.

Note: If the network connection to the ReadyNAS goes down, the quarantine logs are no longer saved, and all other logs are saved on the UTM. In this situation, the ReadyNAS and quarantine status fields show OFF on the System Status screen (see View the System Status Screen on page 487). When the network connection comes back up, the quarantine logs and all other logs are saved on the ReadyNAS once again, but the logs that were saved on the UTM are deleted.

Connect to a ReadyNAS

To connect to the ReadyNAS on the UTM:

1.Select Administration > ReadyNAS Integration. The ReadyNAS Integration screen displays:

Network and System Management

459