NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual 590, Security Options on

ProSecure Unified Threat Management (UTM) Appliance

Table 151. Add Wireless Profiles screen settings (continued)

Field	Description
SSID	The wireless network name (SSID) for the wireless profile. The default SSID
	name is netgear-1. You can change this name by entering up to
	32 alphanumeric characters. Make sure that additional SSIDs have unique
	names.
Broadcast SSID	Select the check box to enable the wireless profile to broadcast its SSID,
	allowing wireless clients that have a null (blank) SSID to adopt the wireless
	profile’s SSID. To prevent the SSID from being broadcast, clear the check
	box.
Security	Note: Before you configure security, you might want to read Wireless Data
	Security Options on page 584.
	Specify the wireless security by making a selection from the drop-down list:
	• OPEN. This is the default setting. An open system has no authentication
	and no encryption, and therefore no security configuration. However, you
	can use an open system with encryption. To do so, select WEP from the
	Security drop-down list. In the WEP Index and Keys section of the
	screen, take the following steps:
	- Select Open System authentication.
	-	Select the encryption.
	- Enter a passphrase and generate a key, or enter a key manually.
	• WEP. To configure WEP, take the following steps in the WEP Index and
	Keys section of the screen:
	- Select Shared Key authentication.
	-	Select the encryption.
	- Enter a passphrase and generate a key, or enter a key manually.
	• WPA. To configure WPA, select the encryption and authentication. The
	remaining configuration depends on the selected authentication:
	- For WPA-PSK, select a password.
	- For WPA with RADIUS, configure the RADIUS server settings.
	- For WPA with PSK+RADIUS, select a password and configure the
		RADIUS server settings.
	• WPA2. To configure WPA2, select the encryption and authentication. The
	remaining configuration depends on the selected authentication:
	- For WPA2-PSK, select a password.
	- For WPA2 with RADIUS, configure the RADIUS server settings. As an
		option, you can enable RADIUS preauthentication.
	- For WPA2 with PSK+RADIUS, select a password and configure the
		RADIUS server settings. As an option, you can enable RADIUS
		preauthentication.
	• WPA+WPA2. To configure WPA, select the encryption and
	authentication. The remaining configuration depends on the selected
	authentication:
	- For WPA+WPA2 with PSK, select a password.
	- For WPA+WPA2 with RADIUS, configure the RADIUS server settings.
	- For WPA+WPA2 with PSK+RADIUS, select a password and configure
		the RADIUS server settings.

Wireless Network Module for the UTM9S and UTM25S

590