NETGEAR STM150EW-100NAS, UTM5EW-100NAS manual 591, Tkip TKIP+AES, WEP Index and Keys

ProSecure Unified Threat Management (UTM) Appliance

Table 151. Add Wireless Profiles screen settings (continued)

Field	Description
Encryption	The encryption that you can select depends on the type of WPA security that
Note: WPA, WPA2, and	you have selected:
	• WPA. You can select the following types of encryption from the
WPA+WPA2 only.		drop-down list:
		-	TKIP
		-	TKIP+AES
	• WPA2. The encryption is AES.
	• WPA+WPA2. The encryption is TKIP+AES.
Authentication	For WPA, WPA2, and WPA+WPA2 only, specify the authentication by making
Note: WPA, WPA2, and	a selection from the drop-down list:
	•	PSK
WPA+WPA2 only.	•	RADIUS
	•	PSK+RADIUS
WPA Password	For WPA, WPA2, and WPA+WPA2 only, if you have selected PSK or
Note: WPA, WPA2, and	PSK+RADIUS authentication, enter a pre-shared key or password. The
	password length needs to be between 8 and 63 characters (inclusive).
WPA+WPA2 only.
Schedule	To enable the timer, select the Schedule check box. When the timer is
	enabled, the wireless profile is turned off from the start time until the stop
	time. To disable the timer, clear the check box.
	Start Time			Specify the start hour in the Hour field and the start minute in
				the Minutes field, and then select AM or PM from the
				drop-down list.
	Stop Time			Specify the stop hour in the Hour field and the stop minute in
				the Minutes field, and then select AM or PM from the
				drop-down list.
VLAN	From the drop-down list, select the VLAN to which the wireless profile should
	be allocated. The default VLAN is defaultVlan.
VLAN Profiles	To configure a VLAN profile, click the VLAN Profiles link. For information
	about VLAN profiles, see Configure a VLAN Profile on page 103.
Radius Server Settings	For WPA, WPA2, and WPA+WPA2 only, if you have selected RADIUS or
	PSK+RADIUS authentication, click the Radius Server Settings link to
Note: WPA, WPA2, and	configure the RADIUS settings (see RADIUS Client and Server Configuration
WPA+WPA2 only.	on page 310).
WEP Index and Keys
Authentication	Specify the authentication by making a selection from the drop-down list:
	• Open System. Select this option to use WEP encryption without
		authentication.
	• Shared Key. Select this option to use WEP authentication and encryption
		with a shared key (passphrase).

Wireless Network Module for the UTM9S and UTM25S

591