NETGEAR UTM5EW-100NAS manual DMZ Setup screen settings, 118, Setting Description DMZ Port Setup

ProSecure Unified Threat Management (UTM) Appliance

Figure 62.

2.Enter the settings as explained in the following table:

Table 23. DMZ Setup screen settings

Setting	Description
DMZ Port Setup
Do you want to	Select one of the following radio buttons:
enable DMZ Port?	• Yes. Enables you to configure the DMZ port settings. Fill in the IP Address and
	Subnet Mask fields.
	• No. Allows you to disable the DMZ port after you have configured it.
	IP Address	Enter the IP address of the DMZ port. Make sure that the DMZ
		port IP address and LAN port IP address are in different
		subnets (for example, an address outside the LAN address
		pool, such as 192.168.1.101).
	Subnet Mask	Enter the IP subnet mask of the DMZ port. The subnet mask
		specifies the network number portion of an IP address.

LAN Configuration

118