NETGEAR UTM5EW-100NAS, STM150EW-100NAS manual Configure Remote Management Access, 438

ProSecure Unified Threat Management (UTM) Appliance

Note: For enhanced security, restrict access to as few external IP addresses as practical.

•Deny or allow login access from specific browsers. By default, the administrator can log in from any browser.

In general, these policy settings work well for an administrator. However, if you need to change any of these policy settings, see Set User Login Policies on page 404.

Configure Remote Management Access

An administrator can configure, upgrade, and check the status of the UTM over the Internet through a Secure Sockets Layer (SSL) VPN connection.

Note: When remote management is enabled and administrative access through a WAN interface is granted (see Configure Login Policies on page 404), the UTM’s web management interface is accessible to anyone who knows its IP address and default password. Because a malicious WAN user can reconfigure the UTM and misuse it in many ways, NETGEAR highly recommends that you change the admin and guest default passwords before continuing (see Change

Passwords and Administrator and Guest Settings on page 436).

To configure the UTM for remote management:

1.Select Administration > Remote Management. The Remote Management screen displays:

Figure 260.

Network and System Management

438