NETGEAR STM150EW-100NAS Specify Trusted Hosts for Https Scanning,  To specify trusted hosts, 235

ProSecure Unified Threat Management (UTM) Appliance

To delete an untrusted certificate:

1.From the Exceptions - Untrusted Certificates But Granted Access table, select the certificate.

2.Click Delete Selected.

To move an untrusted certificate to the Trusted Certificate Authorities table:

1.From the Exceptions - Untrusted Certificates But Granted Access table, select the certificate.

2.Click Add to Trusted List. The previously untrusted certificate is added to the Trusted Certificates table.

Specify Trusted Hosts for HTTPS Scanning

You can specify trusted hosts for which the UTM bypasses HTTPS traffic scanning and security certificate authentication. The security certificate is sent directly to the client for authentication, which means that the user does not receive a security alert (see Figure 126 on page 231) for trusted hosts.

Note that certain sites contain elements from different HTTPS hosts. As an example, assume that the https://example.com site contains HTTPS elements from the following three hosts:

•trustedhostserver1.example.com

•trustedhostserver2.example.com

•imageserver.example.com

To bypass the scanning of the https://example.com site completely, you need to add all three hosts to the trusted hosts list because different files from these three hosts are also downloaded when a user attempts to access the https://example.com site.

To specify trusted hosts:

1.Select Application Security > SSL Settings > Trusted Hosts. The Trusted Hosts screen displays.

Content Filtering and Optimizing Scans

235